|
|
Post by AtomicWedgie on Jun 12, 2011 22:50:08 GMT -5
I need a new hood so who makes them?
|
|
|
|
Post by poppaj on Jun 12, 2011 23:27:43 GMT -5
Sled City Fiberglass-Larry Augenstien, known him since the 60's good guy to deal with and makes nice parts.
|
|
|
|
Post by texoutsider on Jun 13, 2011 3:51:22 GMT -5
I heard that Tom Ferguson bought out all of Fiberglass Plus's Mopar molds...will try and get in touch with him.
Mark
|
|
|
|
Post by AtomicWedgie on Jun 13, 2011 9:06:35 GMT -5
I bought Fiberglass Plus bumpers a few years back so I will see if I can get ahold of Tom. You wouldn't have a number for him would you?
I heard that Sled City made good parts also.
I am looking for the hood that has the holes in it for the MW crossram intake.
|
|
|
|
Post by kwik63 on Jun 13, 2011 11:12:39 GMT -5
Check out Larry at Sled City...Good Guy...Good Parts
|
|
|
|
Post by Dave Schultz on Jun 13, 2011 16:28:00 GMT -5
Mine (fenders, hood, scoop, decklid, bumpers) came from www.wsracingfiberglass.com/They were expensive, shipping was expense, and they needed a lot of expensive massaging -- and still show defects under the paint. I might get a scoop from the if I had to -- but nothing else. |
|
|
|
Post by bigtime2 on Jun 13, 2011 23:18:02 GMT -5
i got my hood from AAR in Florida! my scoop from Sled city! you looked at it in the stagging lanes !!!
the hood is Very nice piece!!!
|
|
dvw
New Member
Posts: 3
|
Post by dvw on Jun 15, 2011 21:17:51 GMT -5
i got my hood from AAR in Florida! my scoop from Sled city! you looked at it in the stagging lanes !!! the hood is Very nice piece!!! I agree I just received a hood for my 64 Belvedere from AAR. It's really a nice piece. Doug |
|
