15x8 black steelies w/28x10.5 MT ET slicks

[AtomicWedgie]

Steelies: They are from Stockton Wheels. Black w/4.5 back spacing and locking valve stems

Slicks: M/T ET drags 28x10.5 they have 6 total runs. First 2 runs were done with a light burn out(cars shakedown runs).

They are mounted and balanced. Would like to sell them together but could sell seperate.

$500 plus shipping. I have PayPal

[bobmosher]

Interested in the wheels,i can only fit a nine inch tire, stock eliminator setup, got any pictures. I am in the Chicago Suburbs.

[AtomicWedgie]

I will get some for you this afternoon. What size slicks are you using ? I also have a new set of 30x9x15 M/T ET slicks. I work in Pontiac so maybe we could work something out with pick up/delivery.

[bobmosher]

Sounds good, i,m about an hour and 15 minutes from Pontiac. I use M/T # 3556 its 9x29.5 on a 7 in. rim, looking to improve the footprint. The cross section is the limiting factor, 11.5-11.6 at the most, the 66-67 fairlane is narrow to work with. I just bought tires but if yours fit or the same i might consider them. I,m looking at G.Y, # d2120/d4a as its a little taller and about the same sec. width. Do you know the 9" tire number. i can then check the web sites for dementions. Are the rims drilled for screws?

[AtomicWedgie]

No the rims are not drilled. I am looking for $250 for the rims


The M/T slick part number is: 672-3066 from Jeg's

[bobmosher]

Thanks for the info/pics, the tires are too wide at the section. I need to check with stockton on the difference if any between a Ford and Mopar rim. Get back to you Monday / Tuesday.

[AtomicWedgie]

Steelies are SOLD.

Slicks are still up for sale. Season is getting close. Save yourself some money over a new set. These are basically new. The amount you save could be put into the tow vehicle's gas tank. God know you will need it this year.

$340 shipped